The charger will come with a cord and connector that plugs into your EV. If you don’t already have one, an electrician will need to wire a 240 volt circuit for the station, including a 50-amp circuit breaker. The wiring from your house panel will go to a standard 240 volt receptacle (NEMA 14-50) or be hard-wired directly to the charging station where it is wall-mounted. This location will be convenient for charging your car and the provided length of cord. If the station needs to be hard-wired, the electrician will wire it at the same time they are wiring the 240 volt circuit from your house panel. Be sure to check with your local municipality about getting any required permit for installation.